So I finally got an opurtunity to get a 3D printer, and i want to buy a Voron. I found a V2.4 with 350mm build volume for 770€. Is it worth it? How reliable is a Voron? Have any of you got any experience? All input welcome.
(Edit) I forgot to clarify, the printer is new, not second-hand.
It was definitely worth it for me.
I previously had a Ender 3v2 and an Ender 5 Plus and the E5P had constant issues in which I tried to upgrade it step by step to address those issues. However, never really could fix all of them. The last issues I just gave up on was the bed. While it worked fine, I never really could get a good first layer on the bed, when I calibrated the Z-offset correctly on one side, it wasn’t good on the other side because the nozzle was too far away from the bed. I rarely could get the bed mesh range under 0.4mm which was quite annoying. But smaller prints, it printed well.
Last year in October, I decided to build a Voron and got the 2.4 LDO kit for 350mm. Took a bit of time to get it all assembled and some hiccups here and there but since it is up and running there is really only one issue that I haven’t quite figured out yet (the A motor sometimes doesn’t want to turn, after re-plugging the cable and restarting, it works without issues).
But I could print PLA, ABS and ABS-GF on it so far. I am also currently building the Armor Turtle AFC (filament changer) for it.
But 770€ for a 250mm V2.4 sounds very low to me so I would assume that it is 2nd hand. This could be fine but keep in mind that the printer also could have issues, issues you might not know about where they would be coming from because you simply bought the machine as a whole. So, identifying the problem could be a bit annoying.
Other than that, I am really happy with mine, I usually get 0.1mm difference in the bed mesh range (running a voron tap as probe), the print speed is great (but I also didn’t optimise it and just used the speed settings from the default profile in Orca Slicer)